Mito MODULAR 300 – 12×9, 60 Lights

$249.00

The MitoMOD 300 size is 12 inches high by 9 wide by 3 inches depth and has 60 LEDs. It is best used for targeted treatment.

Category: Tag:

Description

The Mito Modular series are just like the main Mito lights except they are designed to be modular and connect together to make a larger unit. There are 3 different panel sizes giving a total of  11 different possible configurations to make the light panels as big as you like. Click the buy button to see the different combinations. There is an optional portal stand (sold separately) to attached one or more of the larger lights together.

The MitoMOD 300 size is 12 inches high by 9 wide by 3 inches depth and has 60 LEDs. It is best used for targeted treatment.

Power: 300w (rated power)
Dimensions: 12 x 9 x 3
Wavelength: Red 660nm / NIR 850nm = 50/50
LED Count: 60
Irradiance at 6 Inches: >100mW/cm2
Weight: 6 lbs.
Warranty: 2 Years
Lens Beam Angle: 60 Degrees
Power Consumption: 115w
Best Used For: Targeted Treatment

What’s Included

1 x Power Cable
1 x Linking Power Cable
1 x Detailed User Manual
1 x Over-The-Door Hook
1 x Steel Hanging Cables
1 x Adjustable Pulley System
1 x Protective Goggles

We are an affiliate of MitoRedLight and earn commissions on qualifying purchases you make, thank you! (You don’t pay anything extra). We use these products ourselves and highly recommend them.

How to use your device

Mount your NIR/Red Light therapy light to a door or wall using a hanging fixture or hang it against a wall or surface. You can also stand your light upright during usage.

Turn the power switches to the ON position. There are two separate switches—Red Light 660nm and Near-Infrared 850nm. We recommend using both at the same time for maximum effect.

Expose the area you want to treat on your body about 6-12 inches away from the device for about 10 minutes; longer if you are sitting, standing or exercising further away from 12 in. Exposure should be directly to the skin with no clothes or hair in the way. Treat each area for 10-20 minutes per day. Using your device every day will maximize the rate of response and healing. It is very important to be consistent with red light therapy to notice results.

For first-time users, begin small by starting out with 2-3 minute treatments per area, slowly working up to a 10 minute session over the course of a couple of weeks.  Note that the light is bright! Close your eyes or wear the included goggles.

Download the full user manual here.

The benefits of using the Near-Infrared mode, which penetrates deep into tissue, can include:

  • Pain relief
  • Reduces inflammation
  • Speeds healing from wounds
  • Recovery from exercise
  • Increases circulation
  • Healing of muscles, ligament sprains, bone fractures
  • Enzymes boosted to improve body processes
  • Boots mitochondria functions in cells for healing and energy
  • Boots DNA in body cells for better healing
  • Alleviates allergy symptoms
  • Speeds healing of burns
  • Skin repair

 

The benefits of using the Red Light mode can include:

  • Combats lethargy
  • Improves mood and cognitive function
  • Fights depression and anxiety
  • Boosts liver function
  • Promotes healthier skin
  • Anti-aging benefits
  • Hair re-growth
  • Helps decrease cellulite
  • Speeds up fat loss
  • Beneficial for lungs
  • Reduces scar tissue
  • Promotes circulation
  • Pain relief
  • Enhances the senses
  • Combats certain autoimmune conditions
  • Beneficial for bones
  • Improves nutritional metabolism
  • Beneficial for the heart
  • Regenerates blood
  • Beneficial for kidneys
  • Improves muscle healing and recovery
  • Promotes wound healing

 

FREQUENTLY ASKED QUESTIONS

Q: How long should I use the device for?

A: It depends completely upon the area being treated and the distance of treatment. In general, all that is usually needed is 10-20 minutes.

Q: Should I wear eye protection?

A: Eye protection is not required or necessary. However, we don’t recommend looking directly at the LEDs because it can sometimes be uncomfortable as they are very bright! With that said, your eyes typically become accustomed to the light and it is then OK to open your eyes, as long as you aren’t feeling discomfort.

Q: Why aren’t the infrared LEDs working? I can’t see them.

A: Near infrared (NIR) light is actually not visible to the naked human eye. It is outside of the visual spectrum, and as a result, it cannot be seen. However, there is a very slight glow that comes from the LEDs, especially in dark conditions, so if you are concerned the NIR LEDs are really not working, you can test them that way.

Q: Can children use the device?

A: Yes, children can use the device under adult supervision. Never use the device on infants, though. If a child is older than 12 years old, they may follow the previously referenced treatment times. If a child is younger than 12 years old, they should opt for half the dose that would be recommended for adults.

Q: When can I expect results?

A: Results vary depending on goals and treatment consistency. With that being said, many people will experience benefits such as increased muscle recovery, relief of pain and increased wound healing relatively quickly. However, more systemic benefits such as enhanced skin health, increased energy, improved hormonal health and increased quality of sleep may take 8-12 weeks of consistent use. Using your device every day will maximize the rate of response and healing. It is very important to be consistent with red light therapy.

Q: Does red light therapy interfere with the medications?

A: Red and near infrared light therapy has been proven in thousands of clinical studies and peer reviewed clinical trials to be not only safe but also effective. However, if you use medications such as Tetracycline, Digoxin, Retin A, and/or other photo sensitizing drugs, we recommend consulting with your doctor or health care provider before using the device.

Q: Can I wear clothing during my treatment sessions?

A: Of course, just make sure that the area that you’re treating is completely exposed.